Jiangsu Bada Heavy Industry Technology Co., Ltd

Home > Product > track-typed unloading machines
  1. WYG70 Hydraulic track Grabber
  2. WYG70 Hydraulic track Grabber
  3. WYG70 Hydraulic track Grabber

WYG70 Hydraulic track Grabber

  • Model No.:WYG70
  • Max lifting weight :20T
  • Total weight:46.5T
  • Max. lifting moment:560 kn.m
  • Max. swing torque:8 r/min

 The  unloader technology  of  WYG70 hydraulic track type swing arm grab adopts   the upper part of WYS50 car unloader, which is a mature product of Bada, and t

  1. Detailed information

 The  unloader technology  of  WYG70 hydraulic track type swing arm grab adopts   the upper part of WYS50 car unloader, which is a mature product of Bada, and the lower part  uses the traveling part of the chain bucket gantry car unloader. The traveling motor part is driven by a mature hydraulic motor.In fact, the walking chassis is replaced for the tire unloader, which is suitable for the reloading operation on the railway line. Its reliability is very stable. The hydraulic system pumps, valves, seals  adopts  well-known products  at home and abroad ; The control valve adopts the original international famous brand. In order to check the pressure in the hydraulic system, there is also a hydraulic detection point; High pressure oil pipe is connected reliably, arranged reasonably, and replaced conveniently. Oil leakage is strictly prohibited; The hydraulic oil pipe and cable are routed separately, and protective devices are installed at the exposed pipeline parts that are easy to collide with each other.

The equipment has good stability and safety in joint operation. It only takes 6-10 minutes  to unload 70 tons of coal, sand and gravel , and the remaining materials can be cleaned simply . When unloading other materials, it only needs to replace the grab.Based on the rail surface ,the maximum operating range is 8 meters, the minimum operating height is - 1 meters, and the maximum operating height is 8 meters . The power is electric drive, which is driven by 4 motors. One main power, two for walking, and one for air cooling.


 working performance  parameters


categories

Items

unit

parameters


Basic  dimension

track gauge

m

6.0

Base distance (center distance of two wheels on the same side) 

m

7.8

Door seat clearance dimension (distance from upper plane of rail to bottom plane of girder) 

m

5.3

Maximum turning radius of tail

 

m

3.8

power parameters

Maximum power of motor 

kw

110

 weight parameters 

overall weight

t

46.5


 main performance parameters 

max working range

m

8

max  rated lifting weight ( including crab weight ) 

t

7

 max wheel preasure 

kN

245

 max lifting weight moment

kN/m

560

max working height((Arm head center, determined according to order requirements)

m

8.0

 max working depth

m

0.5

Max. included angle between main and auxiliary boom

°

112

Min. included angle between main and auxiliary boom

 

20

 walking speed (no load )

mm/s

0~400

max luffing time ( no load )

r/min

6.0

Main boom luffing time ( no load )

full range lifting arm

s

9.0

Full range lowering arm

s

11.0

Avenge speed of main boom luffing ( no  load )

 full range lifting arm

mm/s

118

Full range lowering arm

mm/s

96

auxiliary  luffing time ( no -load )

 

full range lifting arm

s

9.0

Full range lowering arm

s

7.0

Average  auxiliary luffing speed ( no load )

 full range lifting arm

mm/s

156

Full range lowering arm

mm/s

200

 

 

image.png


image.png

 

 


Powered by MetInfo 5.3.12 ©2008-2024 www.metinfo.cn