QLYS25HZ ¡°Dual-power¡± Hydraulic Wheeled Straight Boom Grabbing Crane |
|
|
|
¡°Dual-power¡± Hydraulic Wheeled Straight Boom Grabbing Crane is the renewal hydraulic grabbing crane based on autoMobilee crane. The working and driving of this crane are both finished in a control room in the upper part of crane, and also it can hoist 30£¥(when the main boom working) Hoisting weight To drive and move. The moving, turning, hoisting, amplitude of variation and grabbing working of this grabbing crane are all oil-operated, which has stable performance and stepless velocity modulation. Fireproof electric machine and totally-enclosed type motor and circuit are safe when working in key fireproof institution. Fitted with different hydraulic grabber, the crane can load and unload, stack and unstuck to different raw material, such as coal, sand, grass, wood and wastepaper and so on, is the best choice of reservation of raw material to papermaking, cotton and wood industry. According to the concrete requirements of different clients, we produce electricity-operated crane, internal-combustion engine and ¡°dual-power¡± type operated by engine and electricity at the same time, can meet the requirements in different stock place.
The concrete type as follows:
QLYS represents internal-combustion engine, 380V electricity engine. ¡°Dual-power¡± operated type (the upper part of crane control operation and driving).
QLYD represents 380V electricity-operated crane(the upper part of crane control driving, the below part of crane control operation).
QLY represents internal-combustion operated type crane(the upper part of crane control driving). |
|
|
|
Type |
Item |
Unit |
Parameter |
Dimension parameter |
Full length of whole engine/without boom |
mm |
6800 |
Full width of whole engine/without outrigger bearing |
mm |
3500 |
Full height of whole engine |
mm |
3480 |
Wheelbase |
mm |
3200 |
Wheel gage |
Front wheel |
mm |
2600 |
Rear wheel |
mm |
2400 |
Dimension |
Front and rear tire |
Specification and quality |
|
1200-20¡Á18PR
Total 8 pcs. |
Inflation pressure |
kg/cm2 |
8-10 |
Weight parameter |
Total quality of driving state |
kg |
34000 |
Wheel loading |
Front wheel with horizontal boom/vertical boom |
kg |
18000/1500 |
Rear wheel with horizontal boom/vertical Boom |
kg |
16000/1900 |
Motivate parameter |
Internal-combustion engine |
Internal-combustion engine type |
|
6BT5.9-C180 |
Rated power of internal-combustion engine/turning speed |
kw/r/min |
128/2000 |
Rated torque of internal-combustion engine/turning speed |
N£®m/r/min |
843/2000 |
Rated turning speed of internal-combustion engine |
r/min |
2000 |
Electromotor |
Electromotor type |
|
Y225M-4 |
Electromotor power |
kW |
75 |
Driving parameter |
Driving speed |
Max. Driving speed of high gear |
km/h |
15 |
Max. Driving speed of low gear |
km/h |
8 |
Turning diameter |
Min. Turning diameter of engine body |
mm |
<8000 |
Min. Turning diameter of boom tip |
mm |
14500 |
Min. Clearance gap |
mm |
270 |
Approach angle |
|
11¡ã |
Departure angle |
|
14¡ã |
£¨15km/h£©brake distance |
m |
3.1 |
Max. Climbing angle |
High gear |
|
3¡ã |
Low gear |
|
8¡ã |
|
Technical parameter of driving state |
Type |
Item |
Unit |
Parameter |
Main parameter |
Rated. Maximum lifting weight |
Full extend of outrigger |
t |
25 |
Without outrigger |
6 |
Driving (max.) lifting weight |
t |
6 |
Lifting height(main boom+ vice boom) |
m |
20 |
Min. working amplitude(main boom) |
m |
3 |
Max. lifting torque |
t£®m |
100 |
Outrigger |
Longitudinal span |
mm |
5600 |
Reversal span |
mm |
5400 |
Working speed(here refers to internal-combustion engine, parameter of Electromotor is the 80% of this) |
Steering speed |
Work with outrigger |
r/min |
¡Ü3.0 |
Work without outrigger |
r/min |
¡Ü1.5 |
Amplitude time |
Fully raising boom |
s |
¡Ü60 |
Fully falling boom |
s |
¡Ü60 |
Outrigger operating time |
Horizontal |
Extend simultaneously |
s |
¡Ü32 |
Retract simultaneously |
s |
¡Ü25 |
Vertical |
Extend simultaneously |
s |
¡Ü20 |
Retract simultaneously |
s |
¡Ü18 |
lifting speed (single wire) |
The second layer |
Single pump |
m/min |
¡Ý45 |
Double pump |
¡Ý96 |
The third layer |
Single pump |
m/min |
¡Ý52 |
Double pump |
¡Ý110 |
Max. Loading weight of outrigger |
Max. loading weight of one outrigger when work with outrigger |
kN |
196 |
Max. loading weight of double tire when work without outrigger |
kN |
81.5 |
|
Working performance chart of crane |
Lifting performance table when work with full extending outrigger(full steering) |
Rm Lm |
10 |
14 |
18 |
22 |
26 |
3.0 |
25(30) |
|
|
|
|
4.0 |
25 |
22 |
|
|
|
5.0 |
22 |
20 |
18 |
|
|
6.0 |
18 |
16 |
15 |
14 |
13 |
7.0 |
13 |
13 |
12 |
11 |
10.5 |
8.0 |
11 |
11 |
10 |
9 |
8.5 |
9.0 |
9 |
9 |
9 |
8 |
7.5 |
10.0 |
|
8 |
8 |
7 |
6.5 |
12.0 |
|
6.5 |
6.5 |
6 |
5.5 |
14.0 |
|
|
5 |
4.5 |
4 |
16.0 |
|
|
4 |
3.5 |
3 |
18.0 |
|
|
3 |
2.5 |
2 |
20.0 |
|
|
|
|
1.5 |
|
|
|
|
